Cartridge 9
Cartridge 9
The C9 is a pneumatic 3/2-way valve, which supports with its diameter of 9.5 mm, the minimization of space requirements. This small valve can be used both in the normal industrial pneumatics as well as in medical technology.
Service
For questions about the Cartridge 9, other compact valves or tailored versions, please contact our service.
Data sheet
All information about the Cartridge 9 are available as PDF downloads.
Size
The C9 is a pneumatic 3/2-way valve, which supports with its diameter of 9.5 mm, the minimization of space requirements. This small valve can be used both in the normal industrial pneumatics as well as in medical technology.
Connection ports
Particularly advantageous is the serial pneumatic port 1 (input) / 2 (work output) / 3 (venting), which is built in only one cavity in succession. With more than 50 million cycles, the C 9 is a solid continuous hit.
Voltage range
For use in mobile applications such as portable and battery-operated devices, the valve cartridge 9 operating voltages 6, 12, 24 V for low power (less than 1 W).
Switching function
The cartridge 9 valve is of course also as a 2/2-way version NC and NO available. Adaptations to individual requirements of the respective field of application can be realized or need the consent of nass magnet.
Standard Versions
On request among others
- electronic protective circuit
- increased ambient temperature
- increased voltage change
- modified pressure tolerances
- individual voltages.
Application areas
Whether industrial pneumatics, automotive and mobile applications or medical technology - the C9 is a good solution and allows by its size in the smallest space enormous design possibilities.
The electrical connection allows the contact through a custom connector version or on a circuit board. Gladly, the manufacturer will assist in designing the connection geometry.
Visitors of the exhibition 'Compamed' can check all the details to the C 9 and of course to all other products of the extensive portfolio of nass magnet and get personally advise from the manufacturer.
